Forum Replies Created
-
AuthorPosts
-
Thanks Thomas!
Nice to know.
Did some further tests with ThinOS 9.0.4024 and Citrix_2006_1146 on a 3040.
Still calls peer to peer are fine, but when joining a Teams Meeting, audio becomes very bad (robotic voices), even without webcam or screen sharing.
When doing the same tests on a 5070 it seems that Wyse has solved the issues with performance. Teams meetings audio sounds fine even if using webcam and screen sharing.
Upgraded a 3040 to the latest Citrix_2006_1146.pkg. Finally some good news! Audio and video much better!
/ Torsten
Yes 8.6_511 is exactly the same.
Forgot to say they do not use headset for audio or webcam. They are using a dial in number instead. They say it often randomly happens when some one are screen sharing in Teams
Bought a 5070 ThinOS 9.0.3030 with Pentium CPU.
Installed Citrix_2006_1130.pkg
Teams Peer to Peer call works fine both audio and video.
But when we test with a Teams meeting everything goes bad.
During some of the meetings (which only have two participants) everything in the Desktop session are slow – about 20 seconds delay. CPU and Mem on the XenServer was fine. CPU on the Wyse are about 50%.
Every time you leave the meeting Teams hangs for up to two minutes with the screen “Leaving meeting”. You hear 50% of the “leave sound” in the headset. Everything in the session are frozen. Session reliability kicks in.
Then suddenly you get the rest of the sound and the meeting are leaved and the session comes alive again.
This can only be reproduced on a ThinOS
I know Teams prefer G722 codec for meetings and Opus for peer to peer. That might be the root cause here.
I will be having a meeting Friday with Dell presales regarding ThinClients. Their comment by mail regarding 3040 and Teams was: “Our experience is that it requires some more processor power to run teams in the standard expected by users, precisely because of Teams off-load on the box. Therefore, we recommend Wyse 5070 with pentium processor, and preferably 8GB RAM like ThinOS or Wyse 5070 Windows IoT (2019).”
So I do not expect 3040 to be able to run Teams offload as it could with Skype. That is pretty sad.
I have a model with Win 10 2016 LTSB – only one they had on stock
I did Teams audio tests with a single monitor where I listened to what was being said from the client. I was not that impressed.
Speech was sometimes “played” slower or sounded like a robot.
Problem here is that we have a LOT of them.
If we have to buy new clients because of that, I am not sure it will be ThinOS again.
I have just got a 5070 Win 10 IoT to test on.
H Dagks
We have the exact same issue here. I have a few users testing 3040 and Teams. They also say audio getting worse after some time. Especially having meeting with more people. Also doing something else in the Citrix session – eg typing in Word are lagging – until the Teams call is ended.
I have two displays working with a Citrix desktop running 9.0.3030 but my audio quality in Teams are still quite robot bad.
I did the call without video.
We have about 600 pcs 3040 so thats why I am asking.
Yes 5070 could be the replacement
Hmm yeah that did the trick.
Thanks
I just selected redirect all USB devices, and still I dont see the headset
Here are the wnos from the client
TimeZone=”GMT + 01:00″ ManualOverride=Yes TimeZoneName=”Romance” daylight=No
Signon=Yes SaveLastDomainUser=no LastUserName=No
TimeServer=”” DateFormat=dd/mm/yyyy TimeFormat=”24-hour format”
DisableDomain=No
DomainList=wrist
EnableGKey=No
PlatformConfig=All EncryptFS=Yes
WDMService=No QuickMode=No
ThinPrintEnable=No
MaxVNCD=No
FastDisconnect=No
AddCert=wristroot.cer
AddCert=wristInter.cer
AdminMode=No Username= Password= ShowAdmin=No
Privilege=high EnableTrace=No LockDown=No ShowDisplaySettings=Yes EnableKeyboardMouseSettings=Yes DisableChangeDateTime=No
SignOn=Yes ExpireTime=0 RequireSmartCard=No SCRemovalBehavior=0 IconGroupStyle=Default DisableGuest=No
MaxVNCD=1 VNCD_8bits=No VNCD_Zlib=No
VNCPrompt=yes accept=10 ViewOnly=No ActiveVisible=No
VncPassword=******************************** encrypt=yes
SecurityPolicy=warning SecuredNetworkProtocol=No TLSMinVersion=1 TLSMaxVersion=3 DNSFileServerDiscover=Yes TLSCheckCN=Yes
DesktopColorDepth=32
Screen=1 Resolution=DDC Rotate=None refresh=60
device=mtouch mult_touch=No mult_jitter=30
Dualhead=Yes Mainscreen=1 Align=Bottom Swap=No Taskbar=mainScreen Orientation=hort MonitorAutoDetect=Yes
ScreenSaver=0 LockTerminal=1 Type=None PictureTimer=6 PictureOrder=Default PictureCheck=Default PictureLayout=stretch Sleep=10 Unit=No
Screen=2 Resolution=ddc refresh=60 rotate=none
DeskColor=#106424
AutoSignoff=10 Shutdown=no Reboot=no
ShutdownCounter=0
desktop=”Login screen Corona_1600x900_v5_final-01.jpg” layout=Stretch
SysMode=Classic toolbarclick=No ToolBarAutoQuit=No EnableLogonMainMenu=No
AutoLoad=1 VerifySignature=no
PNliteServer=https://login.test.com/citrix/ThinClient StoreFront=no CustomStoreName=”” DefaultSettings=”” ReconnectFromButton=0 RequestIconDataCount=10 ReconnectAtLogon=2 Timeout=0 CAGExternal=no CAGUserAsUPN=noPasswordServer=”” AccountSelfService=yes
SessionConfig=ica \
ondesktop=no PasswordExpireNotify=no HttpUserAgent=”” ClientName=”” AudioQuality=high DiskMapTo=”” DesktopMode=fullscreen SessionReliability=yes USBRedirection=hdx HDXFlashUseFlashRemoting=Always HDXFlashEnableServerSideContentFetching=Disabled EnableRTME=yes FlipByTimer=0MultiFarm=no MultiDomain=no
MultiLogon=no SequentialDomain=no
SessionConfig=all \
unmapprinters=yes unmapserials=yes smartcards=no disablesound=no mapdisks=no disksreadonly=no unmapusb=no VUSB_DISKS=yes VUSB_AUDIO=yes VUSB_PRINTER=yes VUSB_VIDEO=yes MultiMonitor=yes FullScreen=yes ondesktop=allReconnect=0
NoReducer=no
LowBand=no
FastDisconnect=no
DEVICE_SECURITY=No
Seamless=yes fullscreenreserved=yes
EnableRAVE=yes
Alternate=no
IcaBrowsing=HTTP
KeyboardLayout=Dk Charset=ISO-8859-1
Device=keyboard \
repeatdelay=2 repeatrate=1KeySequence=yes Ctrl+Alt+Del=yes Ctrl+Alt+Up=no Ctrl+Alt+Down=no Ctrl+Alt+Left=no Ctrl+Alt+Right=no Win+L=yes Alt+Tab=no
Device=vusb \
ForceRedirect=”” ForceLocal=”” Type=HDX InterfaceRedirect=yesNoGlobalIni=Yes
EnableLocal=yesI have done the same now.
-
AuthorPosts