Forum Replies Created
-
AuthorPosts
-
@ConfGen wrote:
And this converter will stop DDC from working.
CG
Ok I have solved the resolution problem. It was due to a setting in citrix.
One last question. When a user push shutdown of the tc he reboots. I don’t know why :s@aLiE wrote:
If you read the manual you will see that “screen=1” and the “resolution=ddc” value are default (check out page 43) and therefore bold.
This means if you don’t change it this will be the settings which will be used, so only change it if you want something else compared to the default.
btw how is the Wyse device connected just DVI or with a converter in between ?
Ok thanks, There is a converter in between.
@ConfGen wrote:
NTFS is not supported – correct.
With MapDiskUnderZ parameter you should get a “virtual” disk names Z:. If you plug in your USB stick after the session was enabled, there is a subfolder under z: created reflecting your stick.
Plug and Play will be supported with XA6 and the new 7.1_033 firmware which was released today.CG
Thank You very Much Confgen. Everything works perfect right now!
Just one small issue with the screen resolution. There are different screens in the environment so the tc must choose the best option.
I use “Screen=1 Resolution=DDC” but looks like this isn’t working.Can you help me?
@ConfGen wrote:
Change unmapusb=no to unmapusb=yes and add SessionConfig=ICA MapDisksUnderZ=yes .
This should work. If not, make sure Floppy mapping is allowed on your Citrix server.
CG
Ok it works now! But it looks like the NTFS FileSystem is not supported. Only the FAT32?
Also plug and play doesn’t work. User must before he logon push his usb key in the tc.Can somebody confirm this?
@aLiE wrote:
Are you using the “Configuration Generator” ? (check the download area if you don’t have it)
This helps a lot if not it’s the best way to configure your wnos.ini
Jep
everything works now for me except of the usb mappings. Anyone has a suggestion. On a normal fat client I can access my usb keys. My wnos file is as below
;*************************************************************
;* *
;* This wnos.ini file was generated with the *
;* Configuration File Generator 6.1.01 *
;* Copyright by Thomas Moellerbernd *
;* *
;* https://technicalhelp.de *
;* *
;*************************************************************;*************************************************************
;* General 1 *
;*************************************************************autoload=2
EnableGKey=yes;*************************************************************
;* General 3 *
;*************************************************************AutoSignoff=yes
;*************************************************************
;* Input Devices *
;*************************************************************MouseSpeed=1
;*************************************************************
;* TCX *
;*************************************************************;*************************************************************
;* Time *
;*************************************************************Timeserver=10.81.0.10 Timeformat=”24-hour format” Dateformat=dd/mm/yyyy
TimeZone=’GMT + 01:00′ ManualOverride=yes;*************************************************************
;* Network *
;*************************************************************SignOn=Yes ConnectionManager=Minimize SaveLastDomainUser=Yes
DisableDomain=yes
DomainList=”bossdom”;*************************************************************
;* General Session *
;*************************************************************Sessionconfig=all unmapusb=no mapdisks=yes
;*************************************************************
;* ICA *
;*************************************************************IcaBrowsing=HTTP
PnliteServer=http://xenapp.boss.be ReconnectAtLogon=2 ReconnectFromButton=2 AutoConnectList=”Boss Paints Farm:Desktop”
SessionConfig=ICA DesktopMode=Fullscreen SessionReliability=yes OnDesktop=noThanks for the tip but I allready tried that.
I allready spent a lot of time on the config of the wyse tc!
@ConfGen wrote:
PnliteServer=http://xenapp.boss.be
ReconnectAtLogon=2 ReconnectFromButton=2
AutoConnectList=”Boss Paints Farm:Desktop”This has all to be on one line!
Use this instead:
PnliteServer=http://xenapp.boss.be ReconnectAtLogon=2 ReconnectFromButton=2 AutoConnectList=”Boss Paints Farm:Desktop”CG
I have done that allready but this doesn’t work for session following.
When I have a session on a fat client and then logon to a wyse thin client my session on the fat client disconnects but doesn’t reconnect on the thin client. The thin clients opens a complete new wession. And on between 2 thin clients it’s just the same scenario.my wnos.ini file looks now like this
autoload=2
Privilege=none EnableTrace=yes Lockdown=yes HidePPP=yes HidePN=yes HideConnectionManager=yes HideSysInfo=yes ShowDisplaySettings=yes HideTaskBar=Yes
LowBand=yes
Timeserver=10.81.0.10; 10.81.0.20
TimeZone=’GMT + 01:00′
SignOn=Yes ConnectionManager=Minimize EnableOK=Yes LastUsername=yes
AutoSignoff=yes
Seamless=yes
DisableDomain=yes
DomainList=bossdom
autoconnect=1
SessionConfig=ICA DesktopMode=fullscreen
IcaBrowsing=HTTP
PnliteServer=http://xenapp.boss.be ReconnectAtLogon=2 ReconnectFromButton=2 AutoConnectList=”Boss Paints Farm:Desktop”
Language=Nl_be Charset=ISO-8859-1
Mapdisks=yesAlso on the wyse tc my usb removable drives were not mapped. On a fat client there is no problem.
Mapdisks=yes
UnmapUSB=yes
Looks like these 2 options don’t work.Any idea?
@aLiE wrote:
Try using “AutoConnect=1” for the connection you would like to autoconnect to.
ok that works also.
Just one more thing. I am logged on to tc1 with a published desktop open.
I go to another desk were I can find tc2. I logon over there. My session disconnects on tc but I don’t get the session on TC2.
So I’m Opening a brand new session. My session need to follow me form one device to another deviceCan anyone help me with this last step.
thanks
@ConfGen wrote:
Of course you have to alter SignOn=no to =yes.
CG
Just figured it out
Language=Nl_be Charset=ISO-8859-1
autoload=2
Privilege=High EnableTrace=yes Lockdown=yes HidePPP=yes HidePN=yes HideConnectionManager=no EnableNetworkTest=yes ShowDisplaySettings=yes
DeskColor=”255 255 255″
LowBand=yes
SaveSysinfo=ftp
Timeserver=
TimeZone=’GMT + 01:00′ ManualOverride=yes Daylight=yes Start=030107 End=110107 TimeZoneName=”Pacific Standard Time” DayLightName=”Pacific Daylight Time”
SignOn=Yes ConnectionManager=Minimize EnableOK=Yes LastUsername=yes
Seamless=yes
DisableDomain=yes
DomainList=domain
SessionConfig=ICA DesktopMode=fullscreen
IcaBrowsing=HTTP
PnliteServer=http://xenapp.boss.be
ReconnectAtLogon=2 ReconnectFromButton=2
Autoconnect=0
AutoConnectList=”Boss Paints Farm:Desktop”Only one last thing. When my user had a disconnected session everything is ok, but when he logon and has no session the destkop wouldn’t start automatically. is there something wrong in the syntax of autoconnectlist?
@ConfGen wrote:
Delete the whole ICA section and replace it with
PnliteServer=10.81.2.81; 10.81.2.82; 10.81.2.83; 10.81.2.84; 10.81.2.85; 10.81.2.86 ReconnectAtLogon=2 ReconnectFromButton=2 AutoConnectList=”Farm:Desktop”Replace “Farm:” with your farmname.
This should fix both issues.
CG
When I replace the whole section this doesn’t work at all.
In the connect manager I don’t see anything. And nothing is started
Can you give some more explanation?Thanks
should I put logon=1 on a specific place.
This doesn’t work for me.
THe reconnect = 1 I put over there when a user does a logoff there need to come again a citrix logon screen.Are your clients in the domain, We don’t like that for thin clients?
Language=Nl_be Charset=ISO-8859-1
Screen=1 Resolution=1280×1024
Timeserver=10.81.0.10; 10.81.0.20 Timeformat=”12-hour format” Dateformat=dd/mm/yyyy
TimeZone=’GMT + 01:00′ ManualOverride=yesSignOn=No
SessionConfig=ALL UnmapPrinters=no UnmapSerials=no MapDisks=yes
IcaBrowsing=HTTP
Seamless=no FullscreenReserved=yesCONNECT=ICA
BrowserIP=”10.81.2.81; 10.81.2.82; 10.81.2.83; 10.81.2.84; 10.81.2.85; 10.81.2.86″
Application=Desktop
Description=”Citrix Desktop”
Reconnect=1
Resolution=1280×1024
Logon_Mode=user-specified
HTTPBrowsing=yes
SessionReliability=yes
Mapdisks=yes
LocalCopy=no
Desktopmode=fullscreen
Autoconnect=2
Fullscreen=yes -
AuthorPosts