Forum Replies Created
-
AuthorPosts
-
After the first reboot the central config seems ok and everything is functional. On the second reboot the wallpaper is lost and the central config is now showing https://website/wyse_redirect/wyse_redirect which is not a valid directory.
Very frustrating.
Thanks in advance for any ideas
here is the ini that is located on one of the 2 webservers behind the LB once the devices have been redirected.
AddCertificate=VerisignG3_new2.crt
AddCertificate=SVRSecureG3.crtAdminMode=yes Admin-Username=******* Admin-Password=*******
AutoLoad=2desktop=wall.jpg
Device=audio volume=high
Domainlist=Domain,Domain,Domain
MaxVNCD=noMicBoost=yes
MirrorFileServer=no
PnliteServer=https://Website/citrix/xenith/config.xml ReconnectAtLogon=2 ReconnectFromButton=2 RequestIconDataCount=20
PRIVILEGE=LOW EnableNetworkTest=Yes ShowDisplaySettings=Yes EnableKeyboardMouseSettings=Yes EnablePrinterSettings=yes KeepDHCPRequestIP=yes
SessionConfig=ALL MapDisks=yes DisksReadOnly=yes
SessionConfig=ICA AudioQuality=medium
SignOn=yes EnableOK=yes SaveLastDomainUser=yes
SysMode=VDI toolbarclick=yes ToolbarEnableOneSession=yes
TimeZone=’GMT – 05:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”Eastern Standard Time” DayLightName=”Eastern Daylight Time”
Timeserver=142.205.98.4,142.205.182.34
FIxLicense=Clean
Shutdown=Turnoff
Autosignoff=yes Shutdown=yesThis is the ini that the Xenith’s are looking at when i redirect them. I have cleared the mirror server and all units have rebooted multiple times.
AddCertificate=VerisignG3_new2.crt
AddCertificate=SVRSecureG3.crtAdminMode=yes Admin-Username=******* Admin-Password=*******
AutoLoad=2
desktop=wall.jpg
Device=audio volume=high
Domainlist=Domain,Domain,Domain
MaxVNCD=yes
MicBoost=yes
MirrorFileServer=no
PnliteServer=https://website/citrix/xenith/config.xml ReconnectAtLogon=2 ReconnectFromButton=2 RequestIconDataCount=20
fileserver=https://website/wyse_redirect
PRIVILEGE=LOW EnableNetworkTest=Yes ShowDisplaySettings=Yes EnableKeyboardMouseSettings=Yes EnablePrinterSettings=yes KeepDHCPRequestIP=yes
SessionConfig=ALL MapDisks=yes DisksReadOnly=yes
SessionConfig=ICA AudioQuality=medium
SignOn=yes EnableOK=yes SaveLastDomainUser=yes
SysMode=VDI toolbarclick=yes ToolbarEnableOneSession=yes
TimeZone=’GMT – 05:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”Eastern Standard Time” DayLightName=”Eastern Daylight Time”
FIxLicense=Clean
Shutdown=Turnoff
Autosignoff=yes Shutdown=yesPlace your picture file in the bitmap folder.
Define the picture file desktop=mypicture.jpg in the Xen.ini file
replace you C00_xen firmware file with the latest version in the WNOS folder
Define the AutoLoad=2 in your Xen.ini file
This should upgrade your firmware and define a new background picture.
-
AuthorPosts