- This topic has 12 replies, 2 voices, and was last updated 5 years, 10 months ago by
.
-
Posts
-
Hello,
our ThinOS Clients only offers credentials to logon to our RDP-Farm after boot.
That is all OK, but we want to use the ThinOS Screensaver and LockTerminal function too.
We have set Screensaver=10 LockTerminal=2 Type=0
The Screensaver starts but no LockTerminal.
Why?
Thanks
FrankLockScreen will only work if you have entered your credentials locally first.
You could do the following
– modify the wnos.ini like this:
– SignOn=NTLM
– DomainList=your_domain_fqdnin the RDP connection definition in your wnos.ini add
Username=$UN \
Password=$PW \
Domainname=$DN \This way you authenticate locally against your domain and the used credentials will then automatically been used when opening the RDP session.
CG
I did it that way, but immediately after logging in you will be logged out again. Within a second.
At Domaincontroler you can see the logon / logout process in the event log without errors.NTLM and Kerberos are enabled via GPO.
Any Idea?
Thank youI start ThinOS and try logon to ThinOS with NTLM (Config as you wrote on topic), but the session don´t start. No Error.
On the DC are three Logs ID 4776, 4624 and 4634 within 1 second.Here is the WNOS.ini with a change of the security-relevant entries to PSEUDONYM or XX
;*************************************************************
;* *
;* This wnos.ini file was generated with the *
;* Configuration Generator 8.2.03 *
;* Copyright by Thomas Moellerbernd *
;* *
;* https://technicalhelp.de *
;* *
;*************************************************************;*************************************************************
;* General 1 *
;*************************************************************autoload=0
Fileserver=192.168.XX.XX:XX
EnableLocal=yes
AdminMode=yes Admin-Username=PSEUDONYM Admin-Password=PSEUDONYM;*************************************************************
;* General 2 *
;*************************************************************Fastdisconnect=yes
FormURL=login.bmp
Locale=German
EnableCacheIni=yes
MirrorFileServer=yes;*************************************************************
;* General 3 *
;*************************************************************AutoSignoff=yes Shutdown=yes
Shutdowncounter=0
SysMode=Classic;*************************************************************
;* Privilege *
;*************************************************************Privilege=None HideSysInfo=yes HidePPP=yes HidePN=yes HideConnectionManager=yes ShowDisplaySettings=Yes EnableKeyboardMouseSettings=yes SuppressTaskbar=yes DisableNetworkOptions=yes
;*************************************************************
;* Peripherals *
;*************************************************************Language=De ManualOverride=yes
Device=audio mic_mute=1;*************************************************************
;* Display *
;*************************************************************; If you are Using a version Of WTOS code < 7.0.1_13 please use:
; Resolution=DDC Refresh=
Screen=1 Resolution=DDC
DeskColor=”96 32 128″
Desktop=login.bmp Layout=Center
Screensaver=15 LockTerminal=2 Type=0;*************************************************************
;* Time *
;*************************************************************Timeserver=192.168.10.2 Timeformat=”24-hour format”
TimeZone=’GMT + 01:00′ ManualOverride=yes Daylight=yes Start=030507 End=100507;*************************************************************
;* Network *
;*************************************************************Device=Ethernet Speed=”Auto”
; If you are using a version of WTOS code < 7.1_133 please use:
; RapportDisable= instead of WDMService=
WDMService=No
LowBand=yes
Service=SNMPD Community=public
VDIBroker=Enter_VDI_Broker
ConnectionBroker=Microsoft
SignOn=NTLM EnableOK=Yes DisableGuest=yes SaveLastDomainUser=No
DomainList=”PSEUDONYM.DE”
MaxVNCD=1 VNCD_8bits=yes VNCD_Zlib=yes
VncPassword=”support”
VncPrompt=Yes;*************************************************************
;* Services *
;*************************************************************Service=SNMPD disable=yes
;*************************************************************
;* Printing *
;*************************************************************Device=usbprinter AlwaysOnline=yes
;*************************************************************
;* Wireless / 802.1x *
;*************************************************************IEEE8021X=yes network=wireless access=WPA2-ENT eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2 peapmschapun=wysewifi peapmschappwd=PSEUDONYM peapmschaphidedm=yes
Device=Wireless Mode=Infrastructure SSID=”PSEUDONYM ” RoamSensitive=Medium;*************************************************************
;* General Session *
;*************************************************************SessionConfig=ALL UnmapPrinters=no Smartcards=yes MapDisks=yes DisableSound=Yes
Reconnect=no;*************************************************************
;* RDP *
;*************************************************************SessionConfig=RDP DefaultColor=2 USBRedirection=RDP RDPScreenAlign4=yes
;————————————————————-
;- RDP Session 1 –
;- Each line but the last must end with a ‘\’ –
;————————————————————-CONNECT=RDP \
Host=PSEUDONYM \
Description=”PSEUDONYM ” \
AutoConnect=yes \
Reconnect=-5 \
Colors=true \
Fullscreen=yes \
UniSession=yes \
NoReducer=yes \
Username=$UN \
Password=$PW \
Domainname=$DN \
Smartcards=yes \
Mapdisks=yes \
Disablesound=No \
AudioQualityMode=1 \
RDPAudioRecord=yes \
LocalCopy=no;*************************************************************
;* General 2 Special *
;*************************************************************Include=$mac.ini
Remove
VDIBroker=Enter_VDI_Broker
ConnectionBroker=Microsoft
and for testing reason modify
AutoSignoff=yes Shutdown=yes
to
AutoSignoff=no Shutdown=yesCG
- You must be logged in to reply to this topic.