- This topic has 1 reply, 1 voice, and was last updated 4 years, 7 months ago by brian1020.
-
AuthorPosts
-
February 18, 2020 at 6:57 pm #51799
It seems around the time the 5070 firmware started being used for the 5470 on its release, I’ve noticed some behavioral changes with the 5070 that was not present before. This is specific to the 5070 going to sleep after 1 hour, but you don’t see to be able to wake it.
With our 3040 devices the settings for screensaver and Sleep, everything works fine and wake on USB enabled a user comes back to their desk, moves the mouse or hits the space bar and the 3040’s come back to life.
ScreenSaver=20 LockTerminal=0 Type=2 Image=”Screensaver JPG.jpg” PictureTimer=6 PictureOrder=Default PictureCheck=Default PictureLayout=center Sleep=60 Unit=No
With the 5070, after 60 minutes the device goes to sleep and you have to hit the power button to get things working again. It didn’t use to be this way and I think with the introduction of the 5470 the sleep features for the 5070 have changed. Is there anything I should be doing different for the 5070 to behave as it should? I suppose I can set Sleep=0 and disable it, but is that my only option?
Full WMS INI settings below:
TimeZone=”GMT – 05:00″ ManualOverride=Yes TimeZoneName=”Eastern Standard Time” DaylightName=”Eastern Daylight Time” TimeZoneName=”Eastern” daylight=Yes start=030207 end=110107
Signon=Yes SaveLastDomainUser=no LastUserName=No
TimeServer=omtcfdcorta.xxx.com DateFormat=mm/dd/yyyy TimeFormat=”12-hour format”
DisableDomain=Yes
EnableGKey=Yes
PlatformConfig=All EncryptFS=Yes
WDMService=No QuickMode=No
ThinPrintEnable=Yes
MaxVNCD=No
FastDisconnect=No
AddCert=xxxA_CA2_Intermediary.crt
AddCert=xxx_CA2_Root.crt
AddCert=”xxx PKI Root CA.cer”
AddCert=”xxx Internal PKI CA1.cer”
AdminMode=Yes Admin-Username=GIDANGHPJLOGJCCJPBALIGEAMGHJCJHI Admin-Password=******************************** ShowAdmin=Yes
Privilege=low EnableTrace=No LockDown=No ShowDisplaySettings=Yes EnableKeyboardMouseSettings=Yes DisableChangeDateTime=Yes
SignOn=Yes ExpireTime=0 RequireSmartCard=No SCRemovalBehavior=0 IconGroupStyle=Default DisableGuest=No
MaxVNCD=1 VNCD_8bits=No VNCD_Zlib=No
VNCPrompt=yes accept=10 ViewOnly=No ActiveVisible=No
VncPassword=**********
SecurityPolicy=warning SecuredNetworkProtocol=Yes TLSMinVersion=1 TLSMaxVersion=3 DNSFileServerDiscover=Yes TLSCheckCN=Yes
DesktopColorDepth=32
Screen=1 Resolution=DDC Rotate=None refresh=60
device=mtouch mult_touch=No mult_jitter=30
Dualhead=Yes Mainscreen=1 Align=Bottom Swap=No Taskbar=mainScreen Orientation=hort MonitorAutoDetect=Yes
ScreenSaver=20 LockTerminal=0 Type=2 Image=”Screensaver JPG.jpg” PictureTimer=6 PictureOrder=Default PictureCheck=Default PictureLayout=center Sleep=60 Unit=No
Screen=2 Resolution=ddc refresh=60 rotate=none
DeskColor=#05C3DE
AutoSignoff=10 Shutdown=no Reboot=no
ShutdownCounter=0
desktop=”ThinOS_BG2.jpg” layout=Stretch
FormURL=xxx_WordmarkWhite_R_354x72_Dark_Gray.jpg
SysMode=VDI Toolbardisablemouse=no Toolbardelay=1 toolbarautoquit=Yes Toolbar_no_conmgr=No Toolbardisablehotkey=No ToolbarEnableOneSession=No toolbarstay=1 toolbarclick=No ToolBarAutoQuit=No EnableLogonMainMenu=Yes
AutoLoad=2 VerifySignature=yes
Device=DellCmos audio=Yes adminlock=No usbRearPort=Yes usbFrontPort=Yes acrecovery=PowerOn wakeonlan=LAN WakeonUSB=Yes USBBootSupport=No AutoPower=Daily AutoPowerTime=1:0 CurrentPassword=”” NewPasswordEnc=********************************
PNliteServer=https://mycitrix.corp.xxx.net/Citrix/MyPC StoreFront=no CustomStoreName=”” DefaultSettings=”” ReconnectFromButton=0 RequestIconDataCount=10 ReconnectAtLogon=0 CAGAuthMethod=LDAP Timeout=0 CAGExternal=no CAGUserAsUPN=no
PasswordServer=”” AccountSelfService=yesSessionConfig=ica \
ondesktop=desktops PasswordExpireNotify=yes HttpUserAgent=”” ClientName=”” AudioQuality=default DiskMapTo=”” DesktopMode=fullscreen SessionReliability=yes USBRedirection=hdx HDXFlashUseFlashRemoting=Always HDXFlashEnableServerSideContentFetching=Enabled EnableRTME=yes FlipByTimer=0
MultiFarm=no MultiDomain=no
MultiLogon=no SequentialDomain=no
DefaultUser=”” DefaultDomain=NT4xxxA
Password=””SessionConfig=all \
unmapprinters=no unmapserials=no smartcards=yes disablesound=no mapdisks=yes disksreadonly=no unmapusb=no VUSB_DISKS=yes VUSB_AUDIO=no VUSB_PRINTER=yes VUSB_VIDEO=no MultiMonitor=yes FullScreen=yes ondesktop=desktops
Reconnect=0
NoReducer=no
LowBand=yes
FastDisconnect=no
DEVICE_SECURITY=No
Seamless=yes fullscreenreserved=yes
EnableRAVE=yes
Alternate=no
IcaBrowsing=HTTPDevice=wireless \
SSID=EMPauth MODE=Infrastructure RoamSensitive=low DisableBand=None PreferBand=5G DisableN=no DisableWlan=EnetUpIEEE8021X=yes \
network=wireless profile=EMPauth access=WPA2-ENT eaptype=EAP-TLS servervalidate=no servercheck=no servername=”” tlsclntcert=$SN.pfx tlsclntprikeypwd=”” tlsauthtype=machine peap_tlsversion=1
ScepAutoEnroll=yes EnrollPwd=******************************** ScepAdminURL=xxx10078.corp.xxx.net/certsrv/mscep_admin ScepUser=SVCScep KeyLength=2048 subAltName=”” CACertHashType=MD5 CACertHash=”9AF7BDAC 23DA6A53 2D9A412A 7133F096″ AutoRenew=yes InstallCACert=yes CountryName=”” State=”” Locality=”” Organization=”” OrganizationUnit=”” CommonName=$SN Email=”” KeyUsage=digitalSignature,keyEncipherment ScepUserDomain=NT4xxxA ScepUserPwd=************ RequestURL=xxx10078.corp.xxx.net/certsrv/mscep/mscep.dllIEEE8021X=yes \
network=wired eap=yes eaptype=EAP-TLS servervalidate=no servercheck=no servername=”” tlsclntcert=$SN.pfx tlsclntprikeypwd=”” tlsauthtype=machine peap_tlsversion=1
Device=ethernet \
speed=auto
AutoPower=yes
Locale=us load=no
MirrorFileServer=no
TerminalName=”” \
reboot=no
Inactive=0 NoSessionTimer=0
Device=audio \
volume=middle mute=0 mic_vol=middle mic_mute=no min_cache=1 EnableSpeaker=no playback=”” record=”” mic_gain_device=”” mic_gain=1 DPaudio=no mic_boost=no jack_popup=yes
WDAService=yes \
enableReminder=no
reboot=yes Idle=10 Wday=Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday time=01:00-02:00
Shutdown=default \
Week=0
ManualOverride=yes \
components=Options monitor=yes mouse=yes keyboard=yes timezone=no printer=yes audio=yes network=yes
Device=Camera format=raw width=800 height=448 fps=30 samplerate=0 optimize=No
Device=vusb ForceRedirect=0x1188,0x9525,0x03,0x01,0x01
Device=vusb ForceRedirect=0x1188,0x9535,0x03,0x00,0x01
Device=vusb ForceRedirect=0x1188,0x9545,0x03,0x00,0x01
Device=vusb ForceRedirect=0x1188,0x03e9,0x03,0x00,0x01
Device=vusb ForceRedirect=0x1188,0x03ef,0x03,0x00,0x01
EnableLocal=yesFebruary 19, 2020 at 8:22 pm #51814I did remedy this with Sleep=0. The previous behavior was the monitor going to sleep before the 5470 was introduced. Additionally, the Shut Down, Restart, Sign Out screen on the thin client includes a Sleep option on the 5070 and 5470 but does not include that option on the 3040. This definitely seems to be introduced at the time the 5470 and 5070 started sharing the X10_wnos file as an all-in-one firmware.
-
AuthorPosts
- You must be logged in to reply to this topic.