New Here, USB webcam setup 3040 ThinOS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 8, 2020 at 10:55 pm #53748
    WonsHsoj
    Participant
    • Total Post: 4
    • Newbie
    • ★

    Hey All-

    Huge fan of the site and the configuration generator (Thanks Thomas!)

    I’ve been fussing with a usb webcam and unable to get the device to show up once logged into the VM. Previewing the device in admin mode works great once the resolution is lowered.

    Using wnos, WMS 3.0, Wyse ThinOS PCoIP (8.6_027)

    ;*************************************************************
    ;* *
    ;* This wnos.ini file was generated with the *
    ;* Configuration Generator 8.5.02 *
    ;* Copyright by Thomas Moellerbernd *
    ;* *
    ;* https://technicalhelp.de *
    ;* *
    ;*************************************************************

    ;*************************************************************
    ;* General 1 *
    ;*************************************************************

    autoload=2
    EnableLocal=no HideDefault=yes
    AdminMode=yes Username=admin Password=************** ShowAdmin=yes

    ;*************************************************************
    ;* General 2 *
    ;*************************************************************

    Fastdisconnect=yes CtrlKey=yes PowerButton=signoff
    FastDisconnectKey=F12
    Inactive=60

    ;*************************************************************
    ;* General 3 *
    ;*************************************************************

    Autopower=yes
    AutoSignoff=60
    SysMode=VDI toolbardisable=yes

    ;*************************************************************
    ;* Privilege *
    ;*************************************************************

    Privilege=None

    ;*************************************************************
    ;* Peripherals *
    ;*************************************************************

    Language=Us ManualOverride=yes

    ;*************************************************************
    ;* Display *
    ;*************************************************************

    ; If you are Using a version Of WTOS code < 7.0.1_13 please use:
    ; Resolution=DDC Refresh=
    Screen=1 Resolution=DDC
    Screen=2 Resolution=DDC
    DeskColor=”70 70 70″
    DesktopColorDepth=16 RGB565=yes
    Dualhead=yes
    Screensaver=15 LockTerminal=no Type=0

    ;*************************************************************
    ;* Redirection *
    ;*************************************************************

    ;*************************************************************
    ;* Time *
    ;*************************************************************

    Timeserver=time.google.com Timeformat=”12-hour format” Dateformat=mm/dd/yyyy
    TimeZone=’GMT – 07:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”Mountain”

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    Omitted

     

    December 9, 2020 at 4:03 pm #53757
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    Thanks.

    Where is the rest of your config?
    What backend you are connecting to?
    Any hints in the ThinOS eventlog?

    CG

    December 9, 2020 at 6:25 pm #53769
    WonsHsoj
    Participant
    • Total Post: 4
    • Newbie
    • ★

    CG,

    The config above is everything the Configuration Generator produces in the .ini. Is there more configuration located somewhere else?
    We are using VMware on the backend.

    Here are the logs from the device:

    10:15:14.882 USB: USB Mass Storage Device connected
    10:15:14.882 VUSB: Redirectable Device(0x048d,0x1167,0x08,0x06,0x50)
    10:15:14.883 USB: Found a new 480Mbps device “Mass Storage” on port 1
    10:15:15.346 Bluetooth: download firmware successfully
    10:15:15.413 D: registered, type 0xc, size 1955 MB.
    10:15:15.413 BDEV: RAM:/shadow/dev/sdb 9,0 created
    10:15:15.533 UVC: SkipDesc: 870, cut_len=180, 861
    10:15:15.533 USB: HD Web Camera connected
    10:15:15.533 VUSB: Local Device(0x05a3,0x9331,0xef,0x02,0x01)
    10:15:15.577 scard exit proc=0x29acca4 mrvl_bt_probe
    10:15:16.084 Event Log: output to D:/wnos/trouble_shoot/SVC-WYSE-008_LOG.20201209_171515.txt
    10:15:16.088 UVC: device name=HD Web Camera
    10:15:16.088 USB: Found a new 480Mbps device “uvcvideo” on port 2
    10:15:16.088 micphone function controls
    10:15:16.088 USB AUDIO: endpt_type=1,num_channels=1,subframe_size=2,bit_resolution=16
    10:15:16.089 USB AUDIO: dis_freq sam_freq[0]=16000
    10:15:16.089 USB AUDIO: dis_freq, first_sam_freq[0]=16000, last_sam_freq[0]=16000
    10:15:16.089 in: speed=16000,channel=1,frag=320,size=9600,xfer_frag=3840,xfer_size=115200,residue=0,max_packet_size=384
    10:15:16.089 USB: Found a new 480Mbps device “USB AUDIO” on port 2

    December 10, 2020 at 5:43 pm #53790
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    There is no VMware configuration in the INI file.
    Are you configuring this locally on the clients?

    CG

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.